MN3005 / 3008 Power Supplies
MN3005 and MN3008 can be run at 9v, 12 or 15v DC. 15v operation is recommended however it must be regulated as this is max power supply these devices can
handle. When running 12 or 15vDC, you must use the MN3101 clock. For 9v operation, use the MN3101 for the MN3005 and MN3102 for the MN3008.
If you are running the ABDX at 15v regulated, then you should plan ahead how you will accomplish this. You can use a Road Rage PCB to use a 9v supply to
generate 15v regulated (using the LT1054 chip) or use an 18v adaptor then run it through a 15v regulator (220 type). Consult the Road Rage documentation for
more info on using a charge pump.
To regulate an 18v supply, this method is suggested.
85”W x .78” H
When using this board or a charge pump supply, you should jumper D1 on the ABDX PCB.
Summary of Contents for ABDX
Page 4: ......
