02-18-2016
Optional Parts
Similar to what we did with the original Tournament Edition FightStick, an entire range of
accessories will be available for customizing your TE2+ FightStick to make it your very own.
Below are a few examples and instructions of how to do the customization.
TE2 Bezels
The bezel on the TE2+ is interchangeable. For inserting new bezel, please follow the below
instructions.
1.
After opening the FightStick, using the hex head screwdriver tool, remove the eight hex
screws from the inside of the top casing to remove the bezel.
2.
Insert new bezel.
3.
Reverse instructions to re-assemble.
TE2 Side Panels
The side panels on the TE2+ are interchangeable. For inserting new side panels, please follow
the below instructions.
1.
After opening the FightStick, using the flat head screwdriver tool, remove the four hex
screws from the left side panel and the four hex screws from the right side panel.
2.
Close the FightStick, and flip it over to view the bottom of the FightStick.
3.
Using the hex head screwdriver tool, remove the four hex screws from the bottom of
the right side panel and the four hex screws from the bottom the left side panel.
4.
Remove both side panels.
5.
Insert new side panels.
6.
Reverse instructions to re-assemble.
