Page 4
For technical questions, please call 1-888-866-5797.
Item 58450
Lever Puller
Use on a small dent.
1. Place Lever Puller on the Pull
Tab. Turn knob until both of
the Puller’s feet are flat against
the vehicle’s surface.
2. Slowly squeeze the Lever Puller’s
handles until there is a pop and
the dent is raised. Stop when
dent returns to normal
surface level. Turn knob, if
necessary, to increase pull.
3. Remove Lever Puller.
4. Remove Pull Tab. If necessary,
spray Release Agent around
Pull Tab to soften glue and use
Scraper to remove glue.
5. Clean area thoroughly to remove
Release Agent residue.
