Page 5
For technical questions, please call 1-888-866-5797.
58918
1. Remove tire from vehicle.
2. Place tire on secure level surface.
3. Remove valve core from tire
stem to release air pressure.
4. Ensure Extendable Foot is
flush with Breaker Foot.
5. Place Breaker Foot
between tire and rim.
6. Lightly tap Base so that Breaker Foot
is snug between tire and rim.
NOTICE:
Do not use impact wrench
as it will damage Bead Breaker.
7. Tighten Hook Bolt until
Hook is snug on rim.
8. Tighten Extendable Foot Nut until
Extendable Foot engages with tire bead.
9. Continue to tighten Extendable Foot Nut
until tire bead is broken loose from rim.
10. Steps 4-9 may be repeated on
two or three locations of tire.
Maintenance and Servicing Instructions
Procedures not specifically explained in this manual must be performed only by
a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. Periodically inspect this tool for loose
bolts, bent or damaged components.
2. Regularly wipe down and clean this
tool to keep it in best condition.
3. Occasionally lubricate the
many hinge points of this tool
with a medium weight oil.
4. When not in use, store this tool in
a dry place, protecting it from wet
or corrosive atmosphere. Protect
this tool from accidental damage
by placing it in a storage area
away from other work or traffic.
