Version: User’s manual EN NF-Walker 2 ver. 2.0
Date for this version: 09.02.2017
Page 26 of 56
8.9.
Transfer the user into the NF-Walker 2 – with a seat
1.
Activate the brake and open all buckles. Attach the seat
as high as possible. Transfer the user onto the seat by lifting
manually or by lifting with a hoist. Secure the chest belt.
Picture no. 34 Activate the brake
2.
Place the user’s feet on the front axle and
attach the shoe-clips and calf bows. Avoid
folding the trousers at the front of the leg
before fastening the calf bow to avoid pressure
points. Place both feet on the ground
Picture no. 35 Fasten calf bows and shoe-clips
3.
Attach the elastics/straps at the front and
back of the brace
Picture no. 36 Attach the elastics/straps