Version: User’s manual EN NF-Walker 2 ver. 2.0
Date for this version: 09.02.2017
Page 42 of 56
12.7
Head-support
At the hip plate, belonging to the brace, there is a possibility to attach a Head-support bow. This
head-support bow can be assembled to the hip plate in predrilled holes with a clamping-function.
The height of the head-support bow can be adjusted in height, but in some cases there is a need to
cut the head-support bow in order to adapt the head-support bow to the actual user of NF-Walker 2.
A head-support plate can be assembled onto the head-support bow. This plate can be adjusted in
height on the head-support bow and provides a sturdy fixation point for both a head-support or
straps needed to correct the position of the user.
A head-support can be assembled onto the head- support plate, ensuring comfort and safety for the
user
The head-support parts fit all sizes of NF-Walker 2. The head support bow can be bent to fit the
user’s anatomy if necessary.
Picture no. 60 Head-support
Picture no. 61 Head-support assembled onto the brace
MFM part name
MFM part no.
NFW 2 XS/S Head-support plate
301171
NFW 2 XS/S Head-support bow
301181
NFW 2 XS/S Head-support, for head support plate
300605
Head-support bow
Head-support
Head-support plate