Place the lifting straps inside the chest
belt and in front of the user’s shoulders.
Fasten the lifting straps to the spreader
at the hoist.
Transfer the user into the under
carriage with the hoist while
supporting the head of the user.
Close the lock at the column after the
brace is attached. Release the lifting
straps from the hoist.
Attach the elastics/straps at the front
and back of the brace to the ring clamp.
Release the brake.
Place the user’s feet on the front axle
and attach the shoe-clip and calf bow.
Avoid folding the trousers at the front of
the leg before fastening the calf bow, to
avoid pressure points. Place both feets
on the ground.
Attach the elastics/straps at the front
and back of the brace to the ring clamp.
Activate the brake and open all belts.
Attach the seat high as possible.
Transfer the user onto the seat lifting
manually or by a hoist. Secure the chest
belt.
Remove the seat. Assure that the pelvic
is horizontal according to the hip joint
of the brace before closing the hip-belt.
Transfer the user onto the undercarriage - with lifting straps
Transfer the user onto the NF-Walker 2 in sitting position
- in sitting position with seat
1
1
4
2
2
3
3
