GU_NADIR_V_3_20_EN
9 / 20
5 NADIR RECEIVER
The Receiver assembly includes :
The Hand-held with control buttons and display with an integral transducer
The Cable Pre-identification transducer
The MADE-Flex Rogowski coil transducer for Phase identification.
Battery pack :
The last menu page indicates the level of charge of the integrated battery pack. This reading will only
be correct when the Receiver is disconnected from the charger and the charging cable. To recharge
the battery pack, connect the link cable to the charger in the NADIR Transmitter and connect this in
turn to the mains (230 V
∼
).
Receiver battery life : 5 hours in normal use.
Charging time : 10 hours (when completely discharged).
When the Receiver detects a charge level of 20 %, the display indicates this and turns OFF.
Then, recharge the Receiver.
Turn-off after 5 seconds.
Battery level
20 %
Recharge !
