92
93
ENGLISH
GB
GB
ENGLISH
DISPOSAL
The
crossed-out wheeled bin
logo
requires the separate collection of
waste electric and electronic equip-
ment (WEEE). Such equipment may
contain dangerous and hazardous substances.
These appliances must be returned to a desig-
nated collection point for the recycling of WEEE
and must
not
be disposed as unsorted munici-
pal waste. By doing so, you will help to conserve
resources and protect the environment. Contact
your local authorities for more information.
Children must not play with plastic bags and
packaging material, due to possible injury or
danger of suffocation. Store such material safe-
ly or dispose of environmentally friendly.
Used batteries must be disposed of properly.
Battery selling stores and municipal collection
points offer special containers for battery dis-
posal.
REPLACEMENT PARTS
BATTERIES
The batteries (Type AAA / not included) in the
remote can be replaced. Observe correct polar-
ity and only replace by batteries of the same
type.
CLEANING & CARE
WARNING!
Before working on the
fan, make sure the corresponding cir-
cuit breaker is disconnected.
· To avoid personal injury or damage to the fan
and other items, be cautious when working
around or cleaning the fan.
· Do not use water or detergents when clean-
ing the fan or fan blades. A dry dust cloth or
lightly dampened cloth will be suitable for
cleaning.
BLADE DESIGN
The blades of this fan are reversible. Each blade
side has a different design. This way, the fan
can be installed in two looks, depending on the
blade design you choose.
TECHNICAL DATA
TROUBLESHOOTING
Fan does not start.
Check circuit beaker respectively circuit fuse.
Disconnect from mains supply and check connection terminals inside
the fan.
Light does not work.
Disconnect from mains supply and check connection terminals inside
the cover.
Fan runs unevenly
and/or wobbles.
Disconnect from mains supply and check if the blades are correctly
installed to the motor.
Disconnect from mains supply and check if the ceiling bracket securely
fastened at the ceiling.
If the problem persists, start exchanging the position of single blades.
Fan sounds noisy.
Disconnect from mains supply and check for loose or overtightened
screws.
Nominal voltage
220-240 V~ / 50 Hz
Nominal power of motor
50 W
Nominal power of lighting
20 W
Fan diameter
107 cm
Lamp
LED, not replaceable
Luminous flux
1600 lm
Color temperature
4000 K
Speed settings
Low - Med - Hi - Off / via remote control
Timer settings
2 - 4 - 8 hours / via remote control
Protection Class
/ I
Degree of protection
IP20
Weight
4.8 kg
