STEP 1: Wheel Assembly
1. Attach the wheels (#4) to the wheel stand secure using flat washer Ø20 (#6), hex slotted thin nut
M20x1.5 (#8) and cotter pin Ø4x36 (#5). Install the axle cap (#7) on the end using rubber hammer.
NOTE:
Use a black plastic bushing to fix the axle cap (#7) like below picture. Please cover the black
bushing onto the axle cap, and use rubber/wooden hammer knocking the end of the plastic bushing
and make the axle cap fixed on wheel.
STEP 2: Attach Tow Bar, Fenders and Manual Canister
1. Attach the tow bar (#2) to the hydraulic reservoir using hex bolt M12x35 (#35), flat washer Ø12
(#20) and hex lock nut M12 (#25).
2. Attach fenders (#89 & #90) to the hydraulic reservoir using hex bolt M8x25 (#69), flat washer Ø8
(#37), lock washer Ø8 (#57) and hex lock nut M8 (#38). Attach rubber washer (#113) between
fender and hydraulic reservoir.
3. Remove the hex bolt M6x70 (#104), large flat washer Ø6 (#105) and nylon lock nut M6 (#102)
from the tow bar. Attach the manual canister (#101) to the tow bar by reinstalling items 104, 105
and 102.
Assembly Instructions
Summary of Contents for CARDEN TOOLS LSE2204
