23
Fig 47 Fig 48
9.2.4 Pull up the recoil start handle slowly until an anti-action is felt, keep pulling
until over passing the resistance. At this position, the inlet and outlet valves of the
engine are closed so as to prevent the rusty crankcase.
10. Troubleshooting
10.1 Failure to Start the Engine
: the generator cannot be started. (Figure49)
Fig 49 Fig 50
10.1.1 Check if the ignition switch is at ON position. (Figure 50)
10.1.2 Check if the engine oil level is too low. (Figure 51)
