35 TON LOG SPLITTER ASSEMBLY
Set the shipping crate on a solid flat surface and carefully remove the lid. Use two people and take
all parts out of the shipping crate and inspect the components to ensure there are no missing pieces
before starting to assemble the log splitter follow steps 1 through 8.
TOOLS REQUIRED
x
Rubber
or
Wooden
Hammer
x
13mm, 16mm, 17mm, 18mm, 19mm, 24mm, 27mm Wrenches
x
Large
Adjustable
Wrench
x
Phillips
Screwdriver
x
Pliers
CAUTION
Read and follow all instructions for assembly and operation. Failure to properly assemble this
equipment could result in serious injury to the user or bystanders, or cause equipment damage
.
Engine Shipped Without Oil.
Before starting engine, fill with SAE 10W-30 motor oil.
See engine manual for engine oil capacity.
Hydraulic Reservoir is Shipped Without Oil.
When adding oil verify the oil level using the Oil filter/Dip Stick on the top
of hydraulic reservoir if marking is not shown fill to the L line.
Inspect all Log Splitter Components.
If you have damaged components: Contact the freight company that
delivered the log splitter and file a claim.
Summary of Contents for LSE3502
Page 19: ...DIAGRAMA DE PE AS...
Page 41: ...DIAGRAMA PIEZAS...
Page 61: ......
Page 65: ...Parts Drawing Parts List...