11. Make sure hands are clear from the wedge and crush hazard areas.
CRUSH WARNING
Wedge can cut through skin and break bones. Keep both hands away from wedge and beam slide.
Serious accidents can happen when other people are allowed inside the work zone. Keep everyone
else out of the work zone while operating control lever.
DO NOT wear loose clothing. It can get tangled in moving parts of log splitter.
Only use the log splitter in daylight so you can see what you are doing.
CAUTION
If a log gets stuck, embedded or will not split completely, push the control lever in the reverse direction
and allow the splitter to strip the log from the wedge.
If the log still remains stuck, embedded or will not split, turn the machine off and use a sledge hammer
and crow bar to remove the log.
ALWAYS keep hands clear of the log and wedge while it is retracting.
12. Always keep work zone clean and free of split wood and debris.
FOR VEHICLE TOWING
When vehicle towing, pull the log cradle back in
the direction of the arrow, and stick the spring pin.
Stick the spring pin when using.
When vehicle towing, pull the lifting
bracket back in the direction of the arrow,
and stick the spring pin. Loose the spring
pin when using. Just separate the lifting
bracket from the pin hole.
Summary of Contents for LSE3502
Page 19: ...DIAGRAMA DE PE AS...
Page 41: ...DIAGRAMA PIEZAS...
Page 61: ......
Page 65: ...Parts Drawing Parts List...
