background image

Product User Guide

Reading Rate 1 reading every second up to 1 reading every 24 hours

Memory 10,752 readings per channel

LED Functionality

• Green LED blinks every 5 seconds to indicate unit is logging
• Blue LED blinks every 15 seconds to indicate unit is in wireless mode
• Red LED blinks every 1 second to indicate alarm condition

Memory Wrap 

Around

Yes

Start Modes Immediate Start & Delay Start

Battery Type Ultralife 9V lithium battery included; 

user replaceable

Battery  Life   5 years typical at 15 minute reading rate

Time Accuracy  ±1 minute/month

Computer Interface

USB to mini USB, 250,000 baud for standalone operation or RFC1000 
required for wireless operation

Software XP SP3/Vista/Windows 7/Windows 8 (MadgeTech 4 only)

Operating  

Environment

-20 °C to +60 °C (-4 °F to +140 °F); 0 to 95 %RH non-condensing
0.002 PSIA to 100 PSIA

Dimensions

3.5 in x 3.0 in x 0.95 in (88.9 mm x 76.2 mm x 24.1 mm) 

Data logger only

Weight 4.9 oz (0.3 lb)

Enclosure Material ABS Plastic

Alarm

User configurable audible, on-screen, email and text (SMS) alarms.

Alarm Delay: A cumulative alarm delay may be set in which the device 
will activate the alarm (via LED) only when the device has recorded a 
user specified time duration of data.

Audible Alarm 

Functionality

1 Beep per second for reading alarm above/below threshold

Approvals US (FCC), CA (IC), CE, South Korea (KCC)

RFPRHTemp2000A General Specifications

6

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may 

not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 

undesired operation. 

To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20 cm or 

more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation 

at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co-located or operating 

in conjunction with any other antenna or transmitter.

Summary of Contents for RFPRHTemp2000A

















Reviews: