Element CO2
3
1.
Install the MadgeTech 4 Software and USB Drivers onto a Windows PC.
2.
Connect the RFC1000 wireless transceiver (sold separately) to the Windows PC with the
provided USB cable.
3.
Push and hold the wireless button on the Elem
e
nt CO2 for 5 seconds to activate wireless
communication. The display will confirm “Wireless: ON” and the blue LED will blink every 15
seconds.
4.
Launch the MadgeTech 4 Software. All active MadgeTech data loggers that are within range
will automatically appear in the Connected Devices window.
5.
Select the data logger within the Connected Devices window and click the
Claim
icon.
6.
Select the start method, reading rate and any other parameters appropriate for the desired
data logging application. Once configured, deploy the data logger by clicking
Start
.
7.
To download data, select the device in the list, click the
Stop
icon, and then click the
Download
icon. A graph will automatically display the data.
1.
Install the MadgeTech 4 Software and USB Drivers onto a Windows PC.
2.
Confirm the data logger is not in wireless mode. If wireless mode is on, press and hold the
Wireless button on the device for 5 seconds.
3.
Connect the data logger to the Windows PC with the provided USB cable.
4.
Launch the MadgeTech 4 Software. Elem
e
nt CO2 will appear in the Connected Devices
window indicating the device has been recognized.
5.
Select the start method, reading rate and any other parameters appropriate for the
desired data logging application. Once configured, deploy the data logger by clicking the
Start
icon.
6.
To download data, select the device in the list, click the
Stop
icon, and then click the
Download
icon. A graph will automatically display the data.
Product Operation (Plugged In)
Product Operation (Wireless)
Quick Start Steps
