Element CO2
5
Software Installation Guide
MadgeTech 4 Software
The MadgeTech 4 Software makes the process of downloading and reviewing
data quick and easy, and is free to download from the MadgeTech website.
Installing the MadgeTech 4 Software
1.
Download the MadgeTech 4 Software on a Windows PC by going to:
www.madgetech.com/software-download
.
2.
Locate and unzip the downloaded file (typically you can do this by right clicking on the file
and selecting
Extract
).
3.
Open the
MTInstaller.exe
file.
4.
You will be prompted to select a language, then follow the instructions provided in the
MadgeTech 4 Setup Wizard to finish the MadgeTech 4 Software installation.
MadgeTech Cloud Services
MadgeTech Cloud Services allows users to remotely monitor and manage
groups of data loggers throughout a large facility or multiple locations, from any
internet enabled device. Transmit real-time data to the MadgeTech Cloud Services platform
via the MadgeTech Data Logger Software running on a central PC or transmit directly to the
MadgeTech Cloud without a PC using the MadgeTech RFC1000 Cloud Relay (sold separately).
Sign up for a MadgeTech Cloud Services account at
www.madgetech.com/cloud
.
Installing the USB Interface Driver
USB Interface Drivers can easily be installed on a Windows PC, if they are not already available
and running.
1.
Download the USB Interface Driver on a Windows PC by going to:
www.madgetech.com/software-download.
2.
Locate and unzip the downloaded file (typically you can do this by right clicking on the file
and selecting
Extract
).
3.
Open the
PreInstaller.exe
file.
4.
Select
Install
on the dialog box.
For more detailed information, download the MadgeTech Software Manual at:
www.madgetech.com/mt4-software-manual.pdf
For more detailed information, download the MadgeTech Cloud Services Manual at:
www.madgetech.com/mt-cloud-manual.pdf
