HiTemp140-M12
4
Wiring the Data Logger
HiTemp140-M12 connector is a 4 pin female M12 connection port which allows the user
to change probes as desired. The HiTemp140-M12 will inherit the IP rating of the probe it
is attached to, (up to, and including IP68/IP69K).
Probe Connection
Connecting probes to the HiTemp140-M12
Materials:
15 mm wrench, Compatible Probe with M12 Connector
1.
Connect the probe to the data logger, using the wiring diagram above.
2.
Use a 15 mm hex wrench to tighten the threads and secure the probe to the
data logger.
The HiTemp140-M12 is compatible with
probes that have the wiring configuration
as shown to the left.
