HiTemp140-M12
6
Temperature Sensor
Various RTD Probes with M12 Connector
(Sold Separately)
Measurement Range
18
Ω
to 400
Ω
-200 °C to +850 °C (-328 °F to +1562 °F)
(Probe Dependent)
Temperature Resolution
0.0001
Ω
0.01 °C (0.018 °F)
(Probe Dependent)
Calibrated Accuracy
±0.015
Ω
±0.05 °C (±0.09 °F)
(Probe Dependent)
*Calibrated
Accuracy Range
18
Ω
to 200
Ω
-200 °C to +265 °C (-328 °F to +509 °F)
Connector Type
M12 Female, 4 Pin
Reading Rate
4 readings per second up to 1 reading every 24 hours
Memory
43,690 readings
Start Modes
• Software programmable immediate start
• Delay start up to 18 months in advance
Stop Modes
Manual or Timed (specific date and time)
Trigger Settings
High & Low limits may be set. Once data meets or exceed sets limits, the device will
record to memory. Bi-level start and stop triggers can also be programmed. Users can
specify the number of readings to take after the device triggers.
Readings in Trigger
Settings Mode
18,724 readings
Real Time Recording
May be used with PC to monitor and record data in real time
Password Protection
An optional password may be programmed into the device to restrict access
to configuration options. Data may be read out without the password.
Memory Wrap Around
Yes
Battery Type
3.6V high-temperature lithium battery included;
user replaceable
Battery Life
1 year typical (1 minute reading rate)
Calibration
Digital calibration through software
Calibration Date
Automatically recorded within device
Data Format
Date and time stamped °C, °F, °R, K
Time Accuracy
±1 minute/month at 25 ºC
Computer Interface
IFC400 or IFC406 USB docking station required; 125,000 baud
Operating System
Compatibility
XP SP3/Vista/Windows 7/Windows 8
MadgeTech Software
Compatibility
• MadgeTech Standard Software version 4.2.5.0
• MadgeTech Secure Software version 4.2.4.0 or later
Operating Environment
-40 ºC to +140 ºC (-40 ºF to +284 ºF), 0 %RH to 100 %RH non-condensing,
0.002 PSIA to 60 PSIA
IP Rating
IP40 - logger alone (with no probe connected). The logger will inherit IP rating of the
attached probe (up to, and including IP68/IP69K).
Dimensions
(body)
2.15 in x 0.97 in x 0.97 in (54.5 mm x 24.6 mm x 24.6 mm)
Dimensions
(probe)
Probe dependent
Weight
85 g (3.0 oz)
Materials
Body: 316 Stainless Steel
Approvals
CE
HiTemp140-M12 General Specifications
*Calibrated accuracies based on standard MadgeTech calibrations for 0 Ω to 200 Ω range.
