1
Install Software and Setup USB Data
Logger Interface
Insert the MadgeTech Data Logger Software
USB Flash Drive into an available USB port
on your PC. Click the
Start
menu and choose
Computer or My Computer
. Browse to the
Removable Disk drive corresponding to the
USB port you selected.
For Windows 7 users, a dialog box may
appear with a list of options. Select “Open
Folder to View files”. If you are not prompted,
click the
Start
menu and choose
Computer
or My Computer
and browse to the
Removable Disk drive corresponding to the
USB port you selected.
A
B
C
Click on the
MadgeTech Software
link on
the USB Contents screen to start the
installation of the Data Logger Software.
The
Install MadgeTech Software
window
will appear, click on the
Install MadgeTech
Software
link. Follow the on screen prompts
to complete the installation. Click Back to
MadgeTech Contents when completed.
The default directory is C:\Program Files\
MTI-USB\Datalogger Interface. If you choose
to change the location of the install direc-
tory click on the
Change Install Location
button. Once you have the install location
set click on the
Install
button to start the
installation.
To install the drivers for the IFC300/400, click on the
Drivers and Third Party
Tools
link on the CD Contents screen. In the next window click on
Install USB
Interface Drivers
. A window will appear prompting for a directory and to start the
installation.
Once you locate the contents
of the USB flash drive, click on
the
autorun
program file. A
set-up screen will display with
options as shown above.
IMPORTANT:
Do not connect the IFC300/400 to your
PC until instructed to do so or the setup will not work.
