background image

RFRHTemp2000A

Internal Channel 

Temperature Range

-20 °C to +60 °C (-4 °F to +140 °F)

Temperature Resolution 0.01 °C (0.02 °F)

Calibrated Accuracy ±0.5 °C/± 0.9 °F (0 °C to +55 °C/32 °F to 131 °F )

Response Time 10 minutes free air

Temperature

Humidity Range 0 %RH to 95 %RH

Humidity Resolution 0.1 %RH

Humidity Calibrated 

Accuracy

±3.0 %RH, ±2.0 %RH typical @ 25 °C 
(10 %RH to 90 %RH; 5 °C to 55 °C)

Response Time 2 minutes to 63% of change

Humidity

RF Frequency

2.45 GHz IEEE 802.15.4 ultra-low power wireless transceiver 
with fully bi-directional communication 

Band

ISM band 2.405-2.475 GHz 
Operation (channels 11 through 25) @ 250 kbps 

Maximum Output 

Power

+0 dBm typical

Receiver Sensitivity 

(RFC1000)

-95 dBm typical

Transmission Distance 

(to other RFC1000’s)

• RFC1000

4,000 ft max. outdoors - line of sight unobstructed
1,000 ft max. indoors - typical urban environment

• RFC1000-CE

2,500 ft max. outdoors - line of sight unobstructed
700 ft max. indoors - typical urban environment

• RFC1000-IP69K

4,000 ft max. outdoors - line of sight unobstructed
1,000 ft max. indoors - typical urban environment

Transmission Distance 

(to data loggers)

• RFC1000, RFC1000-CE & RFC1000-IP69K

2,000 ft max. outdoors - line of sight unobstructed
500 ft max. indoors - typical urban environment

Wireless

7

Battery Warning

WARNING: BATTERY MAY LEAK, FLAME OR EXPLODE IF DISASSEMBLED, SHORTED, CHARGED, CONNECTED TOGETHER, 
MIXED WITH USED OR OTHER BATTERIES, AND/OR EXPOSED TO FIRE/HIGH TEMPERATURE. DISCARD USED BATTERY 
PROMPTLY, KEEP OUT OF REACH OF CHILDREN.

Specifications subject to change.

See MadgeTech’s terms and conditions at www.madgetech.com

Summary of Contents for MadgeNet RFRHTemp2000A

















Reviews: