Page 32
MadgeTech PRHTemp2000
Section 7: Computer Interface:
. Fully insert the male connector of the IFC0 interface cable into the
female receptacle of the data logger. Insert fully the RS232 connector
into the Serial Port.
OR
2. Fully insert the male connector of the IFC200 interface cable into the
female receptacle of the data logger. Fully insert the female USB con-
nector into the USB. (Please see the MadgeTech Datalogger Software
manual for further information)
Note: Most MadgeTech data loggers can use both IFC110 and IFC200 interface
cables. For interface cable data logger clarification contact technical support at
603-456-2011 or support@madgetech.com.
