background image

RFVolt2000A

Sensor Type Voltage Sensing Circuitry

Response Time 150mS at Sensor

Measurement Range

-3VDC to +3VDC for 2.5V
-8VDC to +24VDC for 15V
-8VDC to +32VDC for 30V
-160mVDC to +160mVDC for 160mV

Measurement  

Resolution

2.5VDC (0.1mVDC)
15VDC (0.5mVDC)
30VDC (1.0mVDC)
160mVDC (5uV)

Measurement

RF Frequency

2.45GHz IEEE 802.15.4 ultra-low power MadgeNET wireless  
transceiver with fully bi-directional communication 

Band

ISM band 2.405-2.475 GHz 
Operation (channels 11 through 25) @ 250 kbps 

Maximum Output 

Power

+0dBm typical 

Receiver Sensitivity 

(RFC1000)

-95dBm typical 

Transmission Distance 

(to other RFC1000’s)

• 

RFC1000 
4,000’ max. outdoors - line of sight unobstructed 
1,000’ max. indoors - typical urban environment

• 

RFC1000-CE 
2,500’ max. outdoors - line of sight unobstructed  
700’ max. indoors - typical urban environment

• 

RFC1000-IP69K 
4,000’ max. outdoors - line of sight unobstructed 
1,000’ max. indoors - typical urban environment

Transmission Distance 

(to data loggers)

• 

RFC1000, RFC1000-CE & RFC1000-IP69K 
2,000’ max. outdoors - line of sight unobstructed 
500’ max. indoors - typical urban environment

Wireless

Battery Warning

WARNING: MAY LEAK, FLAME OR EXPLODE IF DISASSEMBLED, SHORTED, CHARGED, CONNECTED TOGETHER, 
MIXED WITH USED OR OTHER BATTERIES, AND/OR EXPOSED TO FIRE/HIGH TEMPERATURE. DISCARD USED 
BATTERY PROMPTLY, KEEP OUT OF REACH OF CHILDREN.

Specifications subject to change.

See MadgeTech’s terms and conditions at www.madgetech.com

7

Distributed by MicroDAQ.com, Ltd.          www.MicroDAQ.com          (603) 746-5524

Summary of Contents for RFVolt2000A

















Reviews: