RHTemp1000Ex
PRODUCT USER GUIDE
Battery Warning:
FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE,
DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 80 °C (176 °F).
Specifications subject to change. See MadgeTech’s terms and conditions at
.
Description
RHTemp1000Ex
Temperature Sensor
Resistance Temperature Detector (RTD)
Temperature Range
-40 ºC to +80 ºC (-40 °F to +176 °F)
Temperature Resolution
0.01 ºC (0.018 °F)
Calibrated Accuracy
±0.5 °C (0 °C to ±50 °C), ±0.9 °F (32 °F to 122 °F)
Humidity Sensor
Capacitive Polymer
Humidity Range
0 %RH to 100 %RH (non-condensing)
Humidity Resolution
0.1 %RH
Calibrated Accuracy
±3 %RH maximum
Specified Accuracy Range
25 %RH to 75 %RH, +20 °C to +40 °C
Hysteresis Error 1 % Typical, 3% Maximum
Memory
32,767 Readings
Start Modes
Software programmable immediate or delay start, up to 2 years in advance
Real Time Recording
May be used with PC to monitor and record data in real time
(PC interface not IS rated)
Reading Rate
1 reading every 2 seconds up to 1 reading every 12 hours
Lethality Equations
Sterilization Units and Pasteurization Units are available within software with a click of
a button
Calibration
Digital calibration through software
Calibration Date
Automatically recorded within device and displayed in software
Battery Type
3.6V lithium battery included, user replaceable
Battery Life
2 years typical at 15 minute reading rate
Data Format
Date and time stamped °C, °F, K, °R
Time Accuracy
10 seconds/month (at 0 ºC to 50 ºC)
Required Interface Package
IFC400 or IFC406
Operating System
Compatibility
Windows XP SP3 or later
MadgeTech Software
Compatibility
Standard Software version 4.2.16.0 or later
Secure Software version 4.2.15.0 or later
Operating Environment
-40 °C to +80 °C, 0 %RH to 95 %RH (case properly sealed)
Dimensions
1.7 in x 0.97 in x 0.97 in (42 mm x 24.6 mm x 24.6 mm)
Weight
2.3 oz (65 g)
Materials
316 Stainless Steel/Radel
IP Rating
Not Rated -
Caution:
Do not submerge this product to retain IS rating
Approvals
CE
ATEX Certificate #: 19ATEX0126
IECEx Certificate #: BAS 19.0109
FM3610 approval by SGS North America, Inc.
DOC-1368036-00 REV 1 2019.10.22
6 Warner Road, Warner, NH 03278
(603) 456-2011
•
•
