©Copyright Lotronic 2018
MAD-HIGHPOWER300
2
Description of Remote Control
POWER key: This button is used to power on/off the speaker.
MODE key: Use this button to toggle between radio mode/AUX mode/Bluetooth/USB/SD mode.
MUTE key: mutes the sound. Press again to restore the sound
Play/pause
: In Mp3 mode, short press to play the previous track and long press for fast backwards.
: In Mp3 mode short press to play the next track; long press to fast forward. In radio mode, short press
to save the channel, long press to search FM channels.
VOL- key: This button is to reduce the volume.
VOL+ key: this button is to increase the volume.
EQ key: Helps you to choose between Jazz, Rock, Bass, Normal and Classic mode.
USB/SD key: This button is to choose between USB or TF card.
Repeat key: Press "repeat" once to repeat the song and twice to repeat the entered playlist.
"0-9" numbers:
In radio mode, it refers to FM channel number.
In Mp3 mode, it refers to the track number.
INSTRUCTION OF USE
Press the POWER button to switch the unit on.
Press MODE button to select FM/AUX/BT/USB/TF.
In FM mode: press PLAY button. The speaker will start scanning and store automatically the found radio stations. Once all
station have been searched, the radio will play the first preset channel. For optimum reception it is advisable to pull out the
external antenna. Press NEXT button to listen to the next channel.
Press MODE button and it will enter AUX mode. Use the audio cable (included) to connect the "AUX input" of the speaker to
reproduce music from other devices.
Press MODE button to enter Bluetooth mode. Previously pair the chosen device to the speaker. Once they have been paired
successfully you can sit back and enjoy the music. Regulate the volume with the help of the volume knob.
●
BT Pairing Mode:
Press MODE button on the unit or the remote control until BT is selected.
1).
Put the cell phone within 3 meters;
2).
Activate the BT features on your cell phone so that the cell phone starts to search for the BT device. Please refer to the users’
manual for details
3).
Select “HIGHPOWER” from the device list found by the cell phone;
4).
For some cell phones, the users have to key in the identification code “
0000
” and press ENTER key to pair the unit and cell
phone.
5).
Press RETURN key on the cell phone to exit from the cell phone menu and play music with the unit when there is no barrier
between two cell phones within 10 meters. At this time, you can play music with the unit.
6).
Shortly press PLAY/PAUSE button to play or pause music. Short press “ ” or “ ” key to select the previous or next track.
●
LINE IN MODE:
Press MODE button on the unit or the remote control until LINE is selected. Play the music of the device connected to the AUX
input on the rear panel.
●
USB Mode:
1.
After startup, press MODE to select “USB” and insert the USB device. The unit will automatically read and play the music in
the USB device.
2. P
ress “ ” key shortly to pause or play the track.
3.
Shortly press “ ” key to skip to the previous track.
4.
Shortly press “ ” key to skip to the next track.
●
TF Mode:
1.
After startup, press MODE to select “TF” and insert the TF card. The unit will automatically read and play the music in the TF
card.
2.
Press “ ” key shortly to pause or play the music.
3.
Shortly press “ ” key to skip to the previous track.
4.
Shortly press “ ” key to skip to the next track.
