VI
Instruction Manual
Watchband
To open the watchband,
completely lift up the safety
bracket (A). Then lift up the
clasp (B).
To close fold-over the clasp
and press it down until the
clasp audibly snaps in. Then fold-over the safety
bracket.
To shorten the watchband to the desired length, use a
suitable link remover or similar tool (e.g. Westfalia
Art. No. 849067 or 804823).
For fine adjustment of the watchband length, set the
spring bar in the clasp into the desired hole.
Ratchet Bezel
The watch features a unidirectional ratchet bezel with a
luminescent zero mark. Before diving rotate the bezel
counter clockwise and set the zero mark on the position of
the luminescent minute hand. When looking at the watch
the past diving time can be read immediately.
Replace Battery
Have the battery exchanged only by a professional watch-
maker.
A B
