17
MAGNETIC BRAKE
MANUALLY DISENGAGING MAGNETIC BRAKE
Never put the car in TOW or manually disengage the e-brake on a sloped surface. If it
is necessary, one person MUST be in position to hold the service brake pedal and steer
the vehicle before releasing park brake. Failure to do so can lead to injury and/or vehicle/
property damage.
If there is no power or insufficient voltage to disengage
the e-brake, use an 8mm wrench to tighten the two bolts
on the outside of the brake as shown.
See image to the
right.
Move the vehicle to a safe location, then loosen the
two bolts again. Verify that the park brake is holding the
vehicle before leaving unattended.
The magnetic parking brake automatically engages every time your vehicle comes to a complete stop. It is
disengaged by pressing the accelerator pedal when the ignition is ON and gear selector is in D or R.