Leg
Grid
Pole
Bolt
Lock Nut
Step 3
Step 3
Step 2
Step 2
Step 2
Step 1
Step 2
Fig. 2
Plastic Shipping Caps
Parts List
Check parts list to ensure that you have received all the parts.
Step 3.
Align bottom holes of
Grid
with last hole of
Legs.
Insert
Bolt
upward and
fasten loosely with
Lock Nut.
Repeat by attaching other
Leg
to
Grid.
Step 2.
Insert
Bolt
through hole at the top of the
Leg
and end of
Grid. NOTE: Grid
must be positioned such that the holes align with Leg holes. See Figure 2.
Fasten loosely with
Lock Nut.
Repeat by attaching other
Leg
to
Grid.
Step 1.
Insert
Bolt
upward through hole nearest the curved portion of
Leg
and
Pole.
Fasten loosely with
Lock Nut.
Repeat by attaching other
Leg
to
Pole.
Step 4.
Complete assembly by tightening all fasteners.
Fig. 1
GRIDRAC GR114-116
ASSEMBLY INSTRUCTIONS
GR116
9 Bike Single Sided
GR114
4 Bike Single Sided
MADE IN U.S.A.
PRINTED IN U.S.A.
PINK, 7-24-13, SMC
Part
Quantity
Legs
2
Grid
1
Poles
1
3/8"-16x3 1/2" Hex Bolt
6
3/8"-16 Lock Nuts
6
CONFIDENTIAL DRAWING AND INFORMATION IS NOT TO BE COPIED OR DISCLOSED
TO OTHERS WITHOUT THE CONSENT OF GRABER MANUFACTURING, INC.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
©2013 GRABER MANUFACTURING, INC.
ALL PROPRIETARY RIGHTS RESERVED.
MADRAX DIVISION
GRABER MANUFACTURING, INC.
1080 UNIEK DRIVE
WAUNAKEE, WI 53597
P(800) 448-7931, P(608) 849-1080, F(608) 849-1081
WWW.MADRAX.COM, E-MAIL: SALES@MADRAX.COM
