[Part 3] Using MADRIX 5 Software
//31
www.madrix.com
MADRIX NEBULA User Manual
2] Windows Network Settings
Art-Net is a network-based protocol. MADRIX 5 will use the network card of your computer to send data.
§
It is required to set up the correct network settings in Windows, first.
§
You must use these IP address and Subnet mask settings. Otherwise, Art-Net might not work!
§
The IP addresses of your computer and your MADRIX NEBULA devices need to be different.
§
Set up an individual
IP address
in the following IP address range:
-
2.0.0.1
...
2.255.255.254
or
-
10.0.0.1
...
10.255.255.254
§
Set up the corresponding
Subnet mask
- 255.0.0.0
[Via factory default settings, MADRIX NEBULA devices will have an IP address in the 10.x.x.x
network range, such as 10.77.64.86, for example].
[Please note: Your devices and the sender, such as the PC that runs MADRIX 5, need to have the
same subnet mask!]
§
Restart MADRIX 5, if you have changed the network settings in Windows while MADRIX 5 was
running.
§
Learn more »
Tips [Microsoft Windows / Networks / USB]
§
Example for PCs that are running MADRIX 5:
Summary of Contents for Nebula
