[Part 2] Device Configuration
//17
www.madrix.com
MADRIX STELLA User Manual
- That means that the first channels will be removed. The frame will be shorter.
- Example, continued: Channels 1 to 100 are now removed and the frame has
412 channels in total.
§
Example: Your fixture should start with DMX channel 7.
- In the ideal case, you would set its DMX start address to 7.
- If your fixture somehow is set to channel 6, you could increase its start address
by +1.
- Or you could shift the data that is sent by your device by -1 in order to change
the data from channel #7 to channel #6.
[If you cannot change the fixture's settings or you cannot reach it anymore, for
example.]
§
Please note: According to the DMX512 standard, a minimum of 21 channels will
always be sent.
§
A Channel Offset can have several advantages, such as splitting a single universe
onto multiple output ports.
- For example, your sender can only send on one universe and you wish to output
it on two ports.
On DMX 1, you would like to send the first 150 channels and on DMX 2, you
would like to send channels 151 to 300.
Then, you can set both to the same universe and set a Channel offset of 150 for
DMX 2.
Channel Order -
Allows you to change the order of [color] channels for the output.
§
For example, if you receive channels 1-2-3 [i.e. RGB, for example], the setting 1-
2-3-(4) will send it out as R-G-B. In contrast, the setting 3-2-1 would send B-G-R.
[Please only change this setting when needed and when using simple, standard
fixtures with RGB or RGBW, for example.]
Send Full Frames -
Activates that always 512 channels will be sent out.
§
512 channels are sent per frame even if the data that is received by the device
includes less than 512 channels for this port and universe.
Summary of Contents for STELLA
