Manual
GA-60
4.3. Analogue outputs
GA-60
can be equipped with 16 analogue outputs (8 current and 8 voltage
ones). Analogue outputs module is mounted on the right side in the analysers lid (shown
in Drawing 2.). Connectors are numbered 1÷8 starting from the left. Each connection has
a pair of outputs – one current and one voltage.
Drawing 2.
Localisation of the analogue outputs module in the analysers lid.
With a use of included software each output can be assigned to one of measured
or calculated value. Then current or voltage in the appointed output will be proportional to
the measured gas parameter. Program also allows to specify range within which the
value of current will change.
Voltage ranges in the voltage outputs (U1÷U8) can be set in the program to 0÷5V
or 0÷10V. In a similar way current range can be set to 0÷20mA or 4÷20mA.
8