6
madVR Envy
–
Barco Setup Guide
Copyright © madVR Labs, LLC. All rights reserved.
6.
For the most accurate color, grayscale, and gamma tracking we recommend performing a 3D
LUT. If you do so, please skip step 3 (Envy ignores those settings when a 3D LUT is active). In
step 4, select “Uncorrected” instead of “DCI
-P3-
D65”. In step 5, select “Native” instead of
“HDR”. These settings will produce the widest native gamut and provide some additional
headroom for the most accurate 3D LUT results.
7.
Only if using a scope screen (a screen that has an aspect ratio of 1.85 or greater, such as 2.35 or
2.40 aspect ratio), follow these steps to set up the Envy screen aspect ratio control:
a.
Go to Image-
>Cropping and set Cropping to “2.37:1”, regardless of your screen’s actual
aspect ratio (e.g. do not use 2.39 if you have a 2.40 screen, etc.).
b.
Go to Image-
>Scaling and make sure it is set to “Fill”.
