4.5
Connecting the DC power supply
Connect the open ending of the provided power cord to a DC supply. Refer to the following for power supply require-
ment:
–
Input voltage range: 6-32V
–
Rated current: 650mA
Figure 4.5.1: Power cord included in the package
Plug the DC Molex connector of the power cord in the modem and it will turn on automatically. The status indicator
led will light when power is applied. After few seconds it will blink slowly, meaning the modem is registered on the
network.
Figure 4.5.2: Side view showing power and serial connector
Note:
device can also be powered and connected by USB only using the ACC-CA41 Maestro ’X’
Cable as detailed in 6.3 on page 23.
16
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com