-18-
1 additional handle
1 quick-release bit holder
1 charger for Item No. 91A001, 91A021, 91A025, 91A040, 91A041, 91A045, 91A101, 91A121, 91A125,
91A140, 91A141, 91A145
1 angle attachment (only on MaxiMax) for Item No. 91A040, 91A041, 91A045, 91A140, 91A141, 91A145
1 screwdriver bit PZ2
1 belt clip
1 operating manual
1 folder “Safety Instructions”
2.7 Use according to intended purpose
The drill drivers and impact drill drivers (A18 M bl and
ASB18 M bl) are suitable for drilling without impact in
metal, wood, plastic and similar materials as well as
for screwing and tapping.
The impact drill driver (ASB18 M bl) is in addition
suitable for impact drilling in concrete, masonry,
brickwork and stone.
Any other use than described above is not
permissible. The manufacturer cannot be held liable
for any damage arising from such other use.
In order to use the appliance as intended, you must
comply with the operating, maintenance and repair
instructions specified by MAFELL.
Corrective maintenance work must be carried out by
MAFELL authorised dealers or MAFELL customer
service stations.
The safety instructions applicable in the respective
country of use as well as other generally recognised
rules pertaining to safety and occupational health
must be observed.
Unauthorized changes to the appliance shall rule out
any manufacturer liability for damages resulting
thereof.
3 Safety instructions
Danger
Electrical appliances may be
dangerous if used incorrectly.
Therefore, always observe the
safety instructions summarised in
this chapter and the safety
regulations applicable in the
respective country of use!
-
Wear ear protectors during the use of impact drill
drivers (machines with the designation ASB).
Exposure to noise can cause loss of hearing.
-
Make use of the additional handle supplied with
the appliance. Loss of control may lead to injuries.
-
Always hold the appliance by the insulated
gripping surfaces when carrying out work during
which the bit may hit concealed power lines.
Contact with a live power line may also energize
metal parts of the appliance, thus causing an
electric shock.
-
Convince yourself that no power, water or gas
lines are located at the point where work is to be
carried out (e.g. with the aid of a metal detector).
-
Protect the rechargeable batteries from humidity!
-
Do not throw the rechargeable batteries into a fire!
-
Do not use any defective or deformed
rechargeable batteries!
-
Do not open the rechargeable batteries!
-
Do not touch the contacts of the rechargeable
batteries and do not short-circuit them!
-
A slightly acidic, combustible liquid may leak from
defective li-ion rechargeable batteries! If any
battery liquid is leaking and comes in contact with
the skin, immediately rinse with a copious amount
of water. If any battery liquid gets into your eyes,
rinse with clean water and immediately consult a
doctor for medical treatment!
-
Remove the rechargeable batteries from the
machine before carrying out any setting, retooling,
maintenance or cleaning tasks.
-
Ensure that the machine is switched off when you
push in the rechargeable battery.
-
Dust originating from materials such as leaded
paint, some types of wood, minerals and metal can
be harmful to health. Touching or inhaling these
