-18-
7 Troubleshooting
Danger
Determining the causes for existing defects and eliminating these always
requires increased attention and caution. Pull the mains plug beforehand!
Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the MAFELL customer service.
Defect
Cause
Elimination
No mains voltage
Check power supply
Machine cannot be switched on
Carbon brushes worn
Take the machine to a MAFELL
customer service shop
Machine stops while cutting is in
process
Mains failure
Check mains back-up fuses
8 Special accessories
The following optional accessories are available for the grooving machine KFU 1000 E:
1.
TCT cutting blades:
-
Groove-cutting blade Ø 120 x 3,6 x 20 mm, 12 teeth
Ref. No. 091794
-
Groove-cutting blade Ø 120 x 4,2 x 20 mm, 12 teeth
Ref. No. 091795
2.
Rear guide roller cpl., R 1,5
Ref. No. 202274
3.
Hand grooving tool, semi-circular with 5 replacement knives
Ref. No. 091460
-
Replacement knives for hand grooving tool, semi-circular
Ref. No. 091467
4.
Push handle long
Ref. No. 202545
9 Exploded drawing and spare parts list
The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
