-15-
2.3 Technical data
Universal motor, radio and TV
interference suppressed
230 V~, 50 Hz
Power input (permanent operation)
2300 W
Speed of planing shaft
while idling
at normal load
8500 rpm
8500 rpm
Planing width
205 mm (8 1/16 in.)
Chip removal
0 - 4 mm (0 – 3/16 in.)
Cutting speed at normal load
32.9 m/s (108 ft/sec.)
Weight without mains cable
13,2 kg (29.1 lbs)
Extractor connection diameter
inside / outside
75/80 mm (2 15/16 – 3 1/8 in.)
2.4 Noise emission specifications
Noise emission values determined according to EN 60745-1 and EN 60745-2-14:
Sound power level
Workplace-related emission value
Idling
110 dB (A)
99 dB (A)
The noise measurement is recorded using the planing shaft included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Vibration specifications
The typical hand-arm vibration is 2.7 m/s
2
.
2.6 Scope of supply
Carpenter's plane ZH 205 Ec complete with:
1 set reversible blades
1 connecting cable
1 operating tool
1 operating manual
1 folder “Safety Instructions”
