TDC series user manual rev 1.0
20
M
A
G
T
H
E
A
TR
O
N
Choose Yes to enter the channel name editor.
S e l e c t i o n N a m e
C h 1 U . N a m e
< >
Rotate the wheel to select
the channel to change the name.
Press the wheel to enter the name
entry mode.
E d i t C h 1 U . N a m e
{ > > > L
Press the wheel to cycle through
characters to edit.
Rotate the wheel to change
the character.
7.3.7. PASSWORD submenu
Allows to lock the amplifier to protect from
unintentional changes.
I n p u t P a s s w o r d
[ O p e n ]
> 0 0 0 0 0 1 <
Rotate the wheel to change
the character.
Press the wheel to cycle through
characters to edit.
Enter any password other than “000001“ to lock the
amplifier.
Enter the “000001“ to unlock the amplifier.
Note: The password lock in the PASSWORD
submenu is only applicable to the amplifier’s menu
itself and does not affect the functions of the
Web UI.
7.3.8. SYSTEM UNIT submenu
Allows to choose metric or imperial units.
S y s t e m u n i t
— — —
M e t r i c
— — —
7.4. CHANNEL MENU
The Channel menu is accessed by pressing CH1 or
CH2 buttons to edit the settings of that channel.
If both CH1 and CH2 buttons are pressed at the
same time, both channels will be edited simultaneously
with identical parameters.
7.4.1. VOLUME submenu.
Changes the channel volume.
V o l u m e
> _ _ _ _ _ _
— 1 0 . 0 d B
7.4.2. SOURCE submenu.
Allows to select the input for the selected output
channel.
« S o u r c e »
A n a l o g _ 1
█
— O N
Rotate the wheel to select
the input.
Press the wheel to confirm
the selection.
« S o u r c e »
— — — E X I T — — —
█
—
Select EXIT to discard changes to channel input.
7.4.3. PHASE submenu
US
ING T
H
E F
R
O
N
TA
L M
E
NU