12
English
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING:
Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.
WARNING:
Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Optional Accessories
WARNING:
Since accessories, other than those offered
by Mac Tools, have not been tested with this product, use
of such accessories with this tool could be hazardous. To
reduce the risk of injury, only Mac Tools recommended
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
ACCESSORIES CHART
Accessory
Purpose
3" Backing pad
1/4" mandrel hook and loop for
polishing accessories
White foam pad
Soft buffing for applying wax/
polish
Yellow foam pad
Medium buffing for cutting
compounds
2" Roloc backing pad
1/4" mandrel screw-in for quick
change of sanding and surface
prep accessories
2" sanding discs (40, 60,
80 grit)
Grits of 40, 60, and 80 for course
sanding applications
2" 'Scotch-Brite" discs
surface prep discs
Aggresive action to remove debris
and prep for sanding
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com
.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care for
our environment:
• Run the battery pack down completely, then remove it from
the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed of properly.
Summary of Contents for MCM401
