12
N Series User Manual rev 0.1
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
4.3. System operation - Powered speakers
N series powered full-range
speaker’s amplifier
N series powered subwoofer’s
amplifier
1
3
2
4
5
6
11
10
12
13
14
1
3
2
7
8
9
11
10
12
13
14
1. VOLUME KNOB. Used for adjusting the
volume of the system. Remember to turn
the volume dowm before connecting/
disconnecting INPUT or LINK connectors.
2. LIMIT LED. Is lit when limiter is
operational, indicating excessive signal
through the system.
3. READY LED. Is lit when system is fully
operational.
4. HPF 100 HPF BUTTON. Engages the
100 Hz high-pass filter.
5. MID CUT BUTTON. Engages the mid cut
contour.
6. HF BOOST BUTTON. Engages HF boost
contour.
7. CARDIOID BUTTON AND LED. Used for
cardioid LF arrays.
8. PHASE BUTTON. Switches the polarity
of the subwoofer.
9. LPF BUTTON. Engages the low-pass
filter.
10. INPUT CONNECTOR. Used for
connecting the system to the signal source
(mixing console etc.)
11. LINK CONNECTOR. Used for linking
additional compactible system to same
signal source.
12. HEAT SINK. Do not close the ventilation
openings on the heat sink, as it may cause
the system to overheat and switch off by
itself.
13. MAINS IN. Used for connecting mains
supply to the system.
14. MAINS OUT. Used for feeding the mains
supply to the additional system.
