©
Install_CelmerSL100P - All specification and suggested dimension is for reference only- subject to change without further notice.
8
Remote Control
The following diagram illustrates the functions of a remote control.
Press again to CLOSE.
Press once to OPEN.
Press again to STOP.
Press again to CLOSE.
Press once to OPEN.
Press again to STOP.
Button Functions
Button 1 and button 2 on the wireless remote
control transmitter has the same function.
Press once to OPEN.
Press again to STOP.
Press again to CLOSE.
If the operating range of the remote control
weakens, please check the battery in the
remote control transmitter. Battery needs to
be changed every 3 months depending on the
frequency of usage. Type of battery used is
AE23, 12V.
Battery slot
AE23, 12V
Matching coding between transmitter
and receiver
Remote control transmitter
opened.
Every set of remote control consist of transmitter and receiver. Each transmitter transmission coding
is exact match to the receiver. There are 6561 variation of coding available by setting through DIP
switch. User can set to any coding desired. For security reason, it is recommended that user
change the coding from the default setting for higher security.
Operating the gate with remote control
