13
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
Z Series User Manual rev 0.1
4.1. System operation - Rigging
Z series systems flying via flying adapter
Required accessories:
Z-FB (part No. 0200150000)
Fast and neat flying of the single Z series’ full-range cabinet using flying adapter.
Z series systems mounting via rotating bracket
Required accessories:
Z-RB (part No. 0200150002)
Convenient omnidirectional flying of Z series’ full range cabinet with rotating bracket.
Z series systems dual flying via double flying adapter
Required accessories:
Z-2FB (part No. 0200150001)
Compact flying of two Z series’ cabinets cluster.
- Secure a Z series’ cabinet onto the inner
half-bracket using M10 bolts.
- Use M10 bolts or threaded rods with nut to
secure the outer half-bracket to the support
structure.
- Release the wing-nuts and adjust the tilt
angle of the speaker.
- Tighten up the wing-nuts firmly.
- Choose the appropriate splay angle for your
Z series’ cabinets.
- Secure Z series’ cabinets onto the double
flying adapter using M10 bolts.
- Mount the assembly using the standard 5/8
inch shackle.
- Use different mounting points of flying
adapter to choose different tilt angles.
- Secure Z series’ cabinet onto the flying
adapter using M10 bolts.
- Mount the assembly using the standard 5/8
inch shackle.
- Use different mounting points of flying
adapter to choose different tilt angles.
