Assembly Instructions
Step 4:
H From the peak of the tent work your way
down each pole and connect all quick clips
to the roof poles.
I Connect the remaining S-hooks on the tent
fabric to the corresponding hubs on the roof
edge poles.(Total of 12)
J Lift each leg pole and insert the pin-ring
attached to the tent flooring into the bottom
of the steel leg pole(Total of 8) and then
connect the remaining quick clips to the leg
poles.
K At the corner of the tents pull in opposing
directions to make sure tent floor fully
stretched out. Stake the corners of the tent
by driving tent pegs through the webbing
loops around the base of the tent.
L If Rainfly is not in place as described in
OPTIONAL STEP “D”, drape Rainfly
over tent.
M Connect J-Hooks on Rainfly to metal
loops on the Steel Leg Poles. Repeat
on each Leg Pole around entire tent.
Step 5:
7