Magellan CrossoverGPS
2
Magellan CrossoverGPS Reference Manual
It is not necessary to read this entire document to begin using the Magellan
CrossoverGPS. Most users will find that they can use the Magellan CrossoverGPS right
out of the box and just refer to this manual on those rare occasions when a little help on a
function is needed.
Magellan CrossoverGPS
The Magellan CrossoverGPS uses a touchscreen display for all user inputs. The only
readily accessible button that is normally used is the power button located on the right
side of the unit. To prevent accidental turn on, you need to press and hold the power
button for a few seconds to turn the Magellan CrossoverGPS on. [Note: The reset switch
must be on (in the up position) before the Magellan CrossoverGPS can be turned on.]
All connections to the Magellan CrossoverGPS are located on the left and right sides of
the unit, protected by a rubber covering to keep out moisture. When you need to access
the connectors, simply lift the protective cover from the bottom.
Power
