background image

1

The Magellan CrossoverGPS is a vehicle-navigation aid designed to assist you in arriving to your selected destinations. When 
using the Magellan CrossoverGPS, these safety rules must be followed to prevent accidents that can result in injury or death 
to yourself or others:

California and Minnesota law prohibits mounting any item to your windshield. Please check with your state or local law 
enforcement for applicable regulations regarding windshield mounting. Go to www.magellanGPS.com for alternate 
mounting solutions.  An adhesive disk is supplied with the Magellan CrossoverGPS for use as an alternate mounting 
solution to the dashboard.

When driving, the need to view the display is minimal. Voice prompts will guide you to your destination. The driver 
should enter data or program the Magellan CrossoverGPS only when the vehicle is stopped. Only a vehicle passenger 
should enter data or program the Magellan CrossoverGPS while the vehicle is moving.

It is your responsibility to comply with all traffic laws.

Every attempt is made to ensure that the database is accurate. However, roadways, points of interest (POIs), and 
business and service locations may change over time. The database does not include, analyze, process, consider, or 
reflect any of the following: legal restrictions (such as vehicular type, weight, height, width, load and speed restrictions); 
road slope or grade; bridge height, width, weight, or other limits; population density; neighborhood quality or safety; 
availability or proximity of law enforcement, emergency rescue, medical, or other assistance; construction work zones or 
hazards; road or lane closures; road, traffic, or traffic facilities’ safety or condition; weather conditions; pavement 
characteristics or conditions; special events; traffic congestion. It is your responsibility to disregard any unsafe, 
hazardous, or illegal route suggestions.

Keep the Magellan CrossoverGPS safe from extreme temperature conditions. For example, do not leave it exposed to 
direct sunlight for an extended period of time.

Take care when mounting the Magellan CrossoverGPS in your vehicle, whether using the windshield mount or other 
mount or accessories, that it does not obstruct the driver's view of the road, interfere with the operation of the vehicle's 
safety devices such as air bags, or present a hazard to occupants of the vehicle should the Magellan CrossoverGPS be 
dislodged while driving. You assume the risks associated with damage to your vehicle or vehicle occupants as the result 
of your choices in mounting the Magellan CrossoverGPS.

Laws in some states prohibit wearing stereo headphones while operating a motor vehicle. Please contact your state’s 
Department of Motor Vehicles for information.

The battery in the Magellan CrossoverGPS is rechargeable and should not be removed. In the event it should need to be 
replaced, please contact Magellan Technical Support.

About Charging the Magellan CrossoverGPS

Use only the AC adapter approved for your Magellan CrossoverGPS. Use of another type of AC adapter can result in 
malfunction and/or possible fire hazard due to battery over heating.

Use only the car charger approved for / supplied with your Magellan CrossoverGPS. Use of another type of car charger 
will result in malfunction and/or damage to the receiver.

The Magellan CrossoverGPS is intended to be supplied with a LISTED Power Unit marked with "LPS", "Limited Power 
Source" and output rated + 5 V dc / 2.0 A".

Use the USB cable approved for / supplied with your Magellan CrossoverGPS.

For safety reasons, the battery in your Magellan CrossoverGPS will stop charging when the ambient temperature is less 
than 32°F (0°C) or more than 113°F (45°C)

IMPORTANT SAFETY WARNINGS

Summary of Contents for CrossoverGPS 2500T






































































Reviews: