Magellan Cyclo 500 Series, User Manual

25

Alerts

•  On screen tap: 

Enable or disable the feedback sound 

while tapping on the screen.

•  Instructions: 

Enable or disable the sound while getting 

instructions.

•  HR Zone Alerts: 

Enable or disable the alert sound by 

HR Zone during your workout.

•  Power Zone Alerts: 

Enable or disable the alert sound 

by Power Zone during your workout.

GPS

The 

GPS

 screen displays the quality of the GPS signal in 

detail. You can see the number of satellites, your current 
position, and the strength of the signals.

Compass

The Compass calibration function allows you to calibrate 
the built-in compass of the device. 
To calibrate the compass:

1. 

Move away from any sources of interference such as 
microwave oven and magnetic devices.

2

.

 Tap 

Start calibration

.

3

.

 Move the device by waving your arm in a figure ∞ 

pattern (as shown on the screen) for several seconds.

4

.

 When done, the message “Compass calibration 

succeeded” will appear on the screen.

If you see the message “Compass calibration failed”, redo 
the movement again until calibration succeeds.

Note:

 While using the built-in electronic compass, place the 

device away from the objects that generate magnetic fields, such 
as electric appliances, magnets or high-voltage tower. This might 
cause your device point to the wrong direction.

Maps

•  Auto Zoom: 

Enable or disable automatic zooming 

during navigation.
If selected, the 

Map

 screen will automatically zoom 

in or out, depending on your speed, to allow optimal 

viewing of your route.

•  Show Cities: 

Display or hide the current city name on 

the navigation/compass screen.

•  Orientation: 

Select orientation of map display.

Track Up — 

The direction you are travelling in will 

display at the top of the 

Map

 screen.

North Up — 

Always display North at the top of the 

Map

 screen.

•  Bike Map: 

Tap to select the preferred set of maps to 

load: 

HERE

 (by Navteq) or 

OSM

 (Open Street Map).

Note:

 The Car navigation mode is always performed using 

HERE maps.

Date & Time

The device will display the date and time based on the 
current GPS location. The 

Date & Time

 screen lets you set 

the date/time format.

•  Set Date format: 

Tap the button to select the 

displayed date format: 

Day/Month/Year

, 

Month/

Day/Year

, or 

Year/Month/Day

.

•  Set Time format: 

You can set the displayed time 

format as 12-hour or 24-hour by tapping the 

24h

 or 

AM/PM

 button.