Auxiliary Functions
ProMARK X
4-15
As you press the RIGHT ARROW you will notice that the second line of the
screen shown above changes, indicating what part of the memory will be
cleared.
Press CLEAR when the area you want to erase is displayed on the second line.
The third line then displays “CLEARED.”
NOTE
The unit must be powered off after clearing any part of the unit's
memory.
AUX 12 — NMEA Output.
This function outputs data in the NMEA
(National Marine Electronics Association) format. To output data in this
format, the unit must be connected to a compatible external device.
Access AUX 12. Use the
RIGHT AR-
ROW
to select "ON." Press
ENTER
.
NMEA OUTPUT
ON
PRESS ENTER !
Use the
RIGHT ARROW
to select Port
1 or Port 2. If you select a port that is
already in use, the NMEA selection
overrides any previous selection. Press
ENTER
.
SELECT PORT
PORT 1
PRESS ENTER !
If you don't have the port set to output NMEA (Setup 7), you can override
the port setting by just pressing ENTER when you access this function.
Use the
RIGHT ARROW
to select the
baud rate for the port you have se-
lected. Press
ENTER
. The unit will
now output position fix data in the
NMEA format through the port you
have selected.
SET BAUD RATE:
9600 BAUD
PRESS ENTER !
Summary of Contents for GPS PROMARK X
