42
Magellan MAP 410 GPS Receiver
Simulate Mode
The Simulate mode will help you become familiar with your receiver and
how it works by generating artificial position fixes. By utilizing Simulate,
the receiver will create a route and will continue until you end it. In order to
end and delete the route created, return to the window where you initiated
the mode and select OFF or power the receiver OFF. It is important to reset
the receiver to your current position and not the position that was created in
the Simulate mode.
A pop-up menu will be displayed giving a list of options
consisting of OFF, AUTO and USER. Highlight OFF to turn
the Simulator mode OFF. Highlight AUTO to turn the
Simulator ON and set a simulated route.
If USER is selected, you will be prompted to input COG and
press ENTER. Then input SOG and press ENTER to display
a simulate activated window. The default setting is OFF.
Contrast
You may want to change the contrast of your receiver’s display. At times
you will need to darken the display or lighten it. Use the following
keystrokes to do this:
From
any NAV
screen.
MENU
Use UP/DOWN
ARROW KEYS to
highlight SETUP.
Use UP/DOWN
ARROW KEYS to
highlight SIMULATE.
ENTER
MARK
ENTER
MARK
WPT NAMES
OFF
ON
WPT NAMES
USER
COG
0
00˚
SOG 025
K
T
M
SETUP
INITIALIZE
NAV SCREENS
COORD SYSTEM
MAP DATUM
ELEV MODE
TIME FORMAT
NAV UNITS
TEMP UNITS
NORTH REF
LIGHT TIMER
BEEPER
PERSONALIZE
CLEAR MEMORY
NMEA
BAUD RATE
SIMULATE
WPT NAMES
OFF
ON
WPT NAMES
CONTRAST
From
any NAV
screen.
MENU
Use UP/DOWN
ARROW KEYS to
highlight CONTRAST.
Use LEFT/RIGHT
ARROW KEYS to
adjust the contrast.
ENTER
MARK
ENTER
MARK
Summary of Contents for MAP 410
Page 1: ...MAP 410 MAP 410 User Manual...
Page 87: ......
Page 88: ...960 Overland Court San Dimas CA 91773 909 394 5000 630319 A...
