Bypassed zones remained unarmed when the
partition is armed.
1. Press the
[
BYP
]
key.
2. Enter your
[
ACCESS
CODE
]‡
.
3. The corresponding zone number will be
displayed on the screen when open.
Select the zone(s) you want to bypass
by entering the two-digit zone number.
For example to enter zone 3 enter
[0]
then
[3]
. The corresponding zone
indicator will flash.
4. Press the
[
ENTER
]
key to save and exit.
A Chime Enabled zone will advise you every
time it is opened by causing your keypad to
beep.
1. Press & hold the
[
]
key. The word
‘Chime’ will appear on the screen.
2. Select the zones you want to Chime by
entering the two-digit zone number. The
corresponding zone number will flash.
For example, to chime zone 2 enter
[0]
then
[2]
. The keypad will automatically
save once the 2-digit zone number is
entered.
3. Press the
[
ENTER
]
key to exit.
B
YPASS
P
ROGRAMMING
C
HIME
P
ROGRAMMING
© Paradox Security Systems Ltd., 2005-2007. Magellan
is a trademark or registered trademark of Paradox
Security Systems Ltd. and its affiliates in Canada, the
United States and/or other countries. All rights reserved.
paradox.com
Printed in Canada 10/2007 MG32I-EQ00
To send a silent or audible alarm to your
monitoring station, press and hold one of the
button combinations listed for 3 seconds.
1. Press the
[
TBL
]
key. The word ‘Trouble’
and the number(s) corresponding to the
trouble(s) will be displayed on the
screen.
2. Read the corresponding explanation of
the trouble from the trouble list in the
MG/SP User Guide. If no repair
instructions are given, call your security
company for repairs.
3. Press the
[
CLEAR
]
key to exit.
\
To view the alarms that occurred during the
last armed period:
1. Disarm the system.
2. Press the
[
MEM
]
key.
3. The corresponding zone numbers that
were in alarm the last time the system
was armed will appear on the screen.
4. Press the
[
CLEAR
]
key to exit.
To mute the keypad:
Press and hold the
[
CLEAR
]
key for 6
seconds to enable or disable Keypad
Muting.
To modify the backlight:
1. Press and hold the [ ] key for 4 sec-
onds.
2. Keys 1, 2, 3, 5 and 6 will flash.
3. Press [2], then use the [ ] and [ ] to
adjust.
4. Press
[
CLEAR
]
or
[
ENTER
]
to exit.
P
ANIC
A
LARMS
Panic Alarm Type
Button Combinations
Police
Medical
Fire
Press [1] & [3]
Press [4] & [6]
Press [7] & [9]
T
ROUBLE
D
ISPLAY
A
LARM
M
EMORY
D
ISPLAY
K
EYPAD
S
ETTINGS
MG32I_EQ00.fm Page 2 Wednesday, October 31, 2007 10:13 AM
All manuals and user guides at all-guides.com
