Magellan MiVue 5 series, User Manual

15

(

1 min

, 

3 min

, or 

5 min

).

-

EV:

 Sets the proper exposure level (

-1 

~

 +1

) to adjust the brightness of the image. 

The default setting is 

0

.

-

HDR:

 Select 

On

 or 

Off

 to enable or disable High Dynamic Range function of the 

device.

-

GPS Stamp:

 Sets if and how you want to record the GPS information.

ƒ

G-Sensor Sensitivity:

 When enabled, the G sensor will prompt the recorder to start 

recording automatically if an event happens.
Select 

Emergency

 or 

Parking Mode

, and then change the sensitivity level of the G 

sensor.
Please note that it is harder to trigger when you set the sensitivity level lower.

ƒ

System:

 Allows you to change the system settings of the device.

-

GPS Status:

 Displays the status of GPS signal reception (GPS enabled models).

-

Date/Time:

 Sets the system date and time. For more information, see the "Setting 

the date and time" section.

-

Beep Alert:

 Enables or disables system notification sounds.

-

Volume:

 Adjusts the volume level.

-

LCD Standby:

 Select 

Always On

 or select how long (

10 sec

, 

1 min

, or 

3 min

) the 

screen remains lit after you press any key.

-

Language:

 Sets the language.

-

Distance Unit:

 Sets the preferred distance unit.

-

Storage Allocation:

 The system provides four default memory configurations to 

store the videos (including continuous recording, event recording and parking 

recording) and photos. Select the proper configuration based on your usage.

-

Restore to Defaults:

 Restores system settings to factory defaults.

-

Version:

 Displays the software information.

ƒ

Format:

 Formats a memory card. (All data will be erased.)