Selecting Destinations
82
If you currently have a map file loaded the unit will prompt you to confirm the switch.
The Magellan RoadMate will list all available map files and also where they are stored
(unit or card).
Select the map file you wish to use.
The unit will prompt you to confirm your selection.
The unit will power off. Turn the unit back on. The map file is now loaded and you can
now route to addresses and POI’s covered by the map file.
Switching SD Cards
You may also need to access data stored on another SD Card. See “Secure Digital (SD) Cards” on page 6 for instructions
on inserting and removing SD Cards.