Preface
Resilience D Installation guide. © 2016, all rights reserved
P a g e
|
3
● Wiring of the unit must be performed according to the wiring instructions detailed in this manual or on
the front box cover.
● Build-up of flammable fumes can result in a hazardous condition if the cell is allowed to operate without
flow. This device must be operated only with the original in-line flow sensor.
● The Flow Sensor must be installed between the last piece of apparatus and the cell.
● Ensure that equipment and materials used in or around the pool and spa are compatible with salt-based
sanitation systems. Certain materials may be susceptible to salt and chlorine damage.
● ALWAYS ADD ACID TO WATER, NEVER WATER TO ACID.
● Make sure the pool's machine room is properly vented to avoid damage from acid vapors.
● Under no circumstances should the machine room be used to store equipment, furniture, sports gear or
any other equipment that is not related to the pool including spare acid containers. The machine room must
be aired and vented prior to entering it.
● Acid container must be stored inside a spill containment vessel (a basin to hold acid in case of overflow or
tipping of the acid container).
●
KEEP THESE INSTRUCTIONS.
